INSTRUCTIONS FOR THE PRESS CALCULATOR
The program is written in Java. 
You will need Java 6 installed on your computer.
Run the Calculator1.2.jar file.

1:  Choose the units, English or Metric.
2:  Choose your press. If you choose Lever Press 
    skip to 4.
3:  Choose the Pin position. Use Pin A for low 
    pressing weights.Use Pin B for higher
    pressing weights
4:  Enter the mechanical advantage of your press.
    Enter the Tare weight of your press ( The Tare
    Weight is the pressing weight with no weights
    on the lever arm). If you have a Sturdy Press
    the mechanical advantage and Tare will be
    entered automatically.
5:  Enter your cheese mold information, either
    the diameter of your mold or the area of your
    mold. 
6:  Enter either the pressing weight or pressing 
    pressure from your recipe.

The result is the weight to hang on the lever arm
    and the amount of water to achieve that weight.